Frictionless tables with roller- or ball cages
The frictionless roller tables of type NK and NKL as well as the linear table type NE are each available in the version with roller or ball cages
Type NK frictionless tables
Type NK frictionless tables are suitable for multiple applications with a large selection of dimensions. Available in a single-axis design, in five sizes, manufactured in steel or cast iron, depending on size. By equipping the tables with Type AC roller cages and Type GB end fittings, these roller tables can also be used for horizontal and vertical installation.
The frictionless roller table type NKL
The frictionless roller table type NKL has a lower weight compared to type NK because its main parts are made of aluminum and is therefore quite a lightweight version. Ball or roller cages as well as a version with FORMULA-S are available as special versions.
The NE linear table
The narrow gap between the top and bottom part of the NE linear table prevents dirt penetration. All sizes of this closed design version are equipped with Type R longitudinal guideways and can be used for all directions of movement.
View Catalogue
A large selection of dimensions, suitable for a wide range of applications
Single-axis design made of steel or cast iron available in five sizes
Type NK frictionless tables are suitable for multiple applications with a large selection of available dimensions. Available in a single-axis design, in five sizes, made of steel or cast iron (depending on size). Type NK frictionless tables consist of equal length top and bottom parts and Type R longitudinal guideways in lengths of 25 to 510 mm and strokes of 10 to 450 mm. All tables are equipped with Type AC roller cages and Type GB end pieces and can be used for horizontal and vertical installation. Standard fastening holes are provided in the lower part. The side opposite the assembly screws can be used as the locating face. In the standard version, limited stroke is performed by two screws on the top part and one screw on the bottom part. Since the screws can only absorb small forces in the direction of movement, they should not be used as stoppers. The FORMULA-S no longer requires screws thanks to the cage-centering principle. As a special version type AK ball cages (-AK) for less sensitivity to dirt and lower load carrying capacity, and an integrated cage control (-KS) are available. For high dynamics and any installation orientation for sizes 3 and 6.
Aluminum main components ensure lightweight design
Ball and roller cages made of plastic are also available as a special version
Type NK, with its aluminummain parts, has a lighter weight than Type NK. Type NKL single-axis frictionless tables consist of equal length top and bottom parts and associated Type R longitudinal guideways, with lengths of 25 to 410 mm and strokes of 10 to 280 mm. All four sizes come equipped with Type AC roller cages and Type GB end pieces, suitable for horizontal and vertical installation. Standard fastening holes are provided in the top and bottom parts. The side opposite the assembly screws can be used as the locating face. In the standard version, limited stroke is performed in the same way as Type NK. The FORMULA-S no longer requires screws thanks to the cage-centering principle. Special versions are available with ball cages (Type AK) for less sensitivity to dirt and a lower load carrying capacity.
Enclosed design prevents dirt penetration
Narrow gap between the top and bottom parts
The narrow gap between the top and bottom part of the NE linear table prevents dirt penetration. All sizes of this closed design version are equipped with Type R longitudinal guideways and can be used for all directions of movement. Threaded fastening holes are standard in the top and bottom parts. The table parts are made of aluminum; the linear guideways are made of stainless steel.